|
The heat produced by different
computer chips has been a main concern with increase in the clock
speed of processors. Therefore some sort of cooling mechanism is
required to minimize the risks posed by extensive heating up of a
computer system. The system processor is most prone to heating up
very quickly.
 Water
cooling is much better than air cooling. Water is a good coolant
compared to air because its thermal conductivity is much higher. It
allows more heat absorption and cools down the system quickly. You
can also mix a small percentage of some other coolant and antifreeze
to make an ideal cooling liquid, but it is recommended that the
percentage of water is at least 60%.
An air cooling system might work
for you if you live in a cold place and don’t over clock your
processor. Some people also get annoyed by the noise made by the
fans so they also opt for a water cooling system, but it is a very
expensive alternative. Mostly gamers, who wish to over clock their
CPU and minimize the risks of overheating, choose this option.
If you wish to opt for water
cooling in your gaming pc then there are two options. One is to have us create and
install a high-quality internal liquid chilled system. The other
option is that you make your own kit by assembling different
components available in market at cheap prices, but this solution is
risky, especially if you are new to computer hardware. Some
manufacturers offer cooling kits along with computer casings. Most
famous kits manufacturers include Corsair, CoolerMaster, Zalman
Tech, Evercool and Aquagate.
Setting up your own, home made
cooling kit is the cheapest solution but it poses some risks to your
system. A leak is very dangerous to all computer parts. It requires
regular maintenance tasks like filling water and checking the pumps.
But if you have purchased a kit from a good and well reputed
manufacturer then you won’t experience these problems.
A water cooling system has is
composed of different parts, which include a reservoir, radiator
(mostly a fan) and pump. All of these components are linked through
tubes. Pump helps in circulation water through the tubes, heat is
absorbed from the system and pumped to the radiator, and there it is
cooled down and again pumped back. A reservoir is an optional
component; its purpose is to remove the air bubbles that might form
in the cooling system. |
